April 1, 2015

 

Linda Maloney

1915 South Jamestown Avenue

Tulsa, OK 74112

918-712-2988 (home)

918-629-1317 (cell)

lfmalon@aol.com

 

 

 

Dear Sir,

There is a reason why so many coworkers and managers have depended on me to pay attention to details and get the job done on time. I have the flexibility to work on a variety of projects utilizing one or more softwares to accomplish the task. I enjoy challenges from time to time while maintaining a solid working relationship with everyone involved. For all these reasons I make a great drafter.

I am an individual with:

·  Several years of experience in the oil and gas industry.

·  Excellent written & oral communication skills

·  A passion to learn and increase skills

Attached is my resume which outlines my skills in the oil and gas industry and more. My primary discipline is mapping, although I have worked in several disciplines in the oil and gas industry

 

I would love to discuss opportunities with you. To schedule an interview, please call 918-712-2988 (home) and leave a voice message should I be unable to answer, or my cell phone at 918-629-1317.

 

Thank you for your time and consideration. I look forward to talking with you.

 

 

Sincerely,

 

 

Linda Maloney

 

 

 

I am a conscientious, detail-oriented professional with proven skills to get the job done in a timely manner, accurately.  I have experience in several softwares. My primary discipline is mapping with additional experience in structural, piping, electrical, mechanical and parts modeling.  Competencies include:

AutoCADArcGISMicrosoft Access                                          InRoads

Microstation V8,V8iMicrosoft ExcelAdobe Acrobat Professional 8 & 9              CadWorx P&ID

Pro-E Wildfire 2Microsoft WordMicrostation Geographics                            AutoCAD Civil 3D

 

Work History

2013-PresentIPS Engineering/EPC

Design Drafter

·   Organized work on property plats for the Bluegrass Project. This job had over 1,000 plats to be created. I kept track using Excel spreadsheets which were adapted as we went along to accommodate our needs. Worked with 3 separate contractors, assigning them plats and working up a separate instruction sheets for each contractor. Work was put on an ftp site and retrieved for checking. I also delegated work within the mapping dept. I had 2 document control people helping me daily as well and reported weekly results to 2 managers.

·   Coordinated a small pipeline project approximately 8 miles long called Summit. I created 14 alignment sheets, 6 road crossings and about 4 site specific drawings. Occasionally I would get help within the dept. when a tight deadline approached.

·   Created standard drawings and investigated better, more efficient ways of producing drawings in AutoCAD Civil 3D. Also conducted a couple of classes for the department for AutoCAD Civil 3D.

 

 

2012-2013Select Engineering

Designer II

·   Created alignment sheets working closely with the coordinator on first major mapping project this company was involved in. I helped him create spreadsheets and scripts to populate windows in the alignment sheets, such as material band, ownership band, etc. We got a larger project after that which involved the same process, but on a larger scale using AutoCAD 2013 for both projects.

·   Utilized ArcMap 10.1 to cut out images for use in alignment sheets. Also created a simple site specific drawing in ArcMap.

·   Helped out doing foundation plans, a P&ID drawing using CadWorx P&ID, and working a little in electrical.

 

2011-2012City of Tulsa

Graphics Specialist

·   Created plan and profile packages for the water dept. using InRoads and Microstation. Occasional visits to the work site were made in order to help plan the best route for new water lines. Worked closely with engineers and engineering techs in order to complete the projects.

·   As-built updates to atlas pages for water, sewer, and stormwater using Microstation GeoGraphics. We are also working on a new PDF process for the public to access atlas sheets on the City browser.

·   Updating old (7 year old) standard drawings.

 

 

 

2010Williams Midstream

Pipeline Mapping Data Technician/Drafter

·   Categorizing pipeline documents for various gathering systems, scanning and processing PDFs to make them fully searchable while adhering to the criteria set up by the dept. Wrote procedures on processing PDFs for in-house and field personnel. Quality checking the work of Print Services, who are assisting in this project.

·   Future work would include as-built alignment sheets.

 

2010MRW Technologies

Drafter

·   Created drawings for various flare towers for customer and vendor use. Also produced related electrical drawings, all working closely with engineers in this small company. Helped set up drawing standards for them in the month I worked there. I did occasional work for this company in the evenings and weekends.

 

 

2010 Spartan Engineers

Mapping Designer

·   Learned Google Earth Pro to make short videos and show routes for projects. Also used images from Google Earth to create alignment sheets for bids. Created crossing drawings, property plats and an HDD drawing in AutoCAD 3D Civil 2010.

·   Assisted in helping management decide what AutoCAD and ArcGIS software to purchase. Maintained project directories and work closely with everyone to get procedures in place and satisfy clients’ needs. This was a start-up engineering company.

 

2007-2009Willbros Engineers

Design Drafter

·   Accomplished several mapping projects producing site specifics, alignment sheets, property plats, quad sheets, etc.

·   Instrumental in developing a new process for GIS related drawings which included processing various documents into searchable PDFs. I organized material, set up a flow chart, processed PDFs, and created PDF job books for a specific project. Upon completion I worked with the client to address any problems or concerns with the PDFs or job book.

 

2003-2007RL Hudson & Company

Design Technician

·   Modeled mainly plastic and rubber parts and created drawings for various clients.

·   Collaborated with engineers to assign tolerance and specifications.

·   Checked most outgoing drawings for accuracy and overall quality.

Checker/Drawing Control Coordinator

·   Checked drawings for accuracy and sign off when corrected.

·   Instrumental in developing the Drawing Control position, created forms for company use, maintained drawing database, kept log of drawing distribution, and maintained hard copy files to Drawing Control as well as Engineering files.

 

 

 

1989-2003Willbros Engineers

Drafting Coordinator (Designer I) (2002-2003)

Noblesville Lateral for CMS Pipeline

·   Oversaw all aspects of this mapping job including alignment sheets, road and railroad crossing drawings, typical, etc.

Drafting Coordinator, Designer (Drafter IV) (1998-2002)

Gulfstream Natural Gas System

Natural gas pipeline extending from Mobile, AL through the Gulf of Mexico to Tampa, FL

·   Assisted with coordination on over 500 property exhibits for approximately ten people, worked on alignment sheets, site specifics, environmental drawings, etc., performed checking on legal plats.

Drafter III (1991-1998)

Great Lakes Pipeline, Tenneco Pipeline, Panhandle Eastern, Kern River, Lakehead Pipeline, etc.

·   Worked on alignment sheets, site specifics, crossing drawings, environmental drawings, and some station work. During this time I also worked on P&ID’s, basic electrical drawings, structural work, and basic 3-D drawings.

·   Performed translations from Microstation to AutoCAD.

 

Drafter I & II / Arts & Charts / Reprographics (1989-1991)

·   Performed manual alignment sheet work on AT&T telecommunications and miscellaneous manual work for Great Lakes Pipeline

·   Drew illustrations for presentations and various drawings.

·   Created a variety of charts (manual and CAD generated) and whatever presentation work was required for clients. Ran copies, assembled, and proofread job books. Ran bluelines and large copies from OCE when required.

 

Education and Training

Broken Arrow High School graduate – Broken Arrow, OK

Tulsa Community College (formerly Tulsa Junior College) – Tulsa, OK – liberal arts major - 65 credit hours

1991Tulsa Community College – AutoCAD certification course

1991Dallas, TX – Microstation certification course

1994Tulsa Community College – Beginning UNIX

1999Tulsa Community College – Beginning ArcView course (GIS certification course)

2001-02New Horizons Learning Center – Microsoft Excel training (beginning, intermediate and advanced)

2002Tulsa Community College – Online Microsoft Access course

2006Tulsa Community College – Geometric Dimensioning & Tolerancing

2007Tulsa Technical School – Basic AutoCAD (2007)

2009Tulsa Community College – GIS Data Acquisition & Management (GIS certification course)

2010Tulsa Community College – Cartography (GIS certification course)

2013AutoDesk University – Las Vegas, NV

 

Extracurricular Activities

While laid off I was a volunteer for the St. John Auxiliary.

I was recruitment leader for the American Heart Association Heart Walk for several years at Willbros. My involvement with heart matters continues by getting Select Engineering to do their first Heart Walk in 2012. I have continued as a recruitment leader at IPS in 2014  (first year of involvement) and again in 2015.